Have you seen how much planter boxes are for the garden? I have and just the other day I was walking the aisle of The Home Depot where I saw a price tage of $58! So I decided to mimic the design and create my own for less than $15 and share it with you. You will need an afternoon to create a rustic picket garden planter box
This is an easy project if you can saw a board, have a miter box, tape measure, and my favorite SPAX screws from The Home Depot which eliminates the need to pre-drill any holes. For this project you will need:
- 4- 5/8″ x 5 1/2″ x 6′ Pressure treated Pine Dog Ear Fence Picket ($1.50+ each)
- 3- 1″ x 2″ x 8″ Pressured treated strips ($1.89+ each)
- 1 1/4″ SPAX screws (or pre-drill holes and use outdoor screws to avoid splitting)
- Saw, measuring tape, miter box/saw, screw driver, pencil, and a couple hours or more depending upon skill level
I am lucky to have a (power electric) compound miter saw so cutting the 45 degree angles is a bit faster but you can simply buy a miter box and saw for around $20-25 dollars which will come in handy for future DIY projects in the home and garden. I also have a Rigid cordless impact driver which makes DIY jobs so much easier. I love Ridgid because they have a lifetime warranty and are powerful enough to do my DIY home and garden projects. Impact driver (what you can put the screw driver bit in) are a must have if you plan on doing more DIY projects so invest once in a great set of tools. (THIS IS JUST MY OPINION BECAUSE I HAVE HAD MANY DIFFERENT BRANDS AND PREFER RIDGID NOW)
Back to the rustic picket garden planter box- I ended up making the box roughly 31″H x 10″W x 12″ D and this could easily be made up to 36″wide with the wood purchase above. I had an oops so my box ended up being 31″ which worked out well because the box is easier to pick up and move (empty). I have built square planter boxes and created concrete baskets throughout my garden.
This rustic picket fence garden planter box (boy that was a mouthful) will age and the wood will become browner with age. I have built garden arbor, garden trellis, garden bridge, and tables out of these pine treated fence pickets and I love the way these pickets age (darker). At The Home Depot there are also cedar 6′ fence pickets too (that I enjoy working with for birdhouses). They are about $2.50 a piece which makes this project around $18.00.
The directions are simple for this and measurments could vary if you want to build it to your size. I do have to add one important tip- make sure to check the thickness of each picket because the sides need to be approximately the same thickness or the trim will not sit flush and hold the sides together (as shown in picture). Here’s the cuts you will make:
- (14) 12″ fence pickets for the sides -precut these pieces
- (6) 10″ fence pickets for the bottom- precut these pieces
- (6) 1″ x 2″ strips cut approximately at 13″ -cut after you assemble the sides/bottom
- (6) 1″ x 2″ strips cut approximately at 31″
- These cuts are approximate because pickets can vary in size and older pickets dry and shrink as much as a 1/4″
- You can make this planter box as wide as you want and I measure in increments of 5 1/2″ or the width of the pickets if they vary in your area.
- Using the width of the pickets as a guide for the size eliminates the need to cut the pickets (ie 6 pickets @ 5 1/2″ = 33″)
Thanks for stopping by and checking out my big box store garden planter hack. If you ever have any questions, feel free to comment below or contact me.
Creating. Inspiring. Gardening without the rules!
2017 copyrighted material C Renee